Locost Build Diary

More progress

Apr 14th 2008
No Comments
respond
trackback
Some more progress was made. The build table construction is under way. Should prove to be pretty robust, and relatively inexpensive. The top is 3/4″ MDF, with a frame of 2x4s adding structure underneath. The legs will be some rough sawn 2x4s (although in this case, REAL 2″ x 4″ boards). 4″ casters all around with brakes will make it relatively movable (just the top alone has to be around 100lbs). Total cost should be around $50. Wiring is mostly pulled from the 240SX as well. Next time around the idea is to pull the rear end, brakes and any other bits and then get rid of the carcass. Some photos: Painting the build table top

240SX Interior being gutted

Wiring harness (well part of it)

Bag of bolts (are these worth anything?)

This post is tagged

No Comments

Leave a Reply